NO, it came with 3/4 inch inlets and outlets, the back up truck only has 1/2 inch lines on the feed tanks, so Bob is sending 1/2 adapters. The Yamada pumps only take 1/2 inch feed lines, why these have 3/4 is beyond me ? It is an impressive looking pump!
flo jet makes air pumps for pushing soda liquid for fountain machines. just Food for thought!
__________________
Bee Clean Pressure Cleaning LLC Serving South Florida Residential and Commercial Chad 561-699-4685 Josh 561-699-4696 New Company Always Doing It Right!!!
I was talking about 1 pump/2 tanks.Adjusting the amount coming from each tank with a ball valve. Just a thought I'm not doin it.
Read about the Apple Vari Flow System. All Flo makes a dual intake manifold that will suck 50/50 water to chlorine, so you just put in a PINCH VALVE on the Chlorine side of the manifold
This will allow you to go from super strong 50/50 mixture, down to a softwash mix, just by adjusting the pinch valve.
The pinch valves have numbers on them, so you can literally dial in your mix.
now tell me if i am wrong it's late at night. if you restrict the flow on the SH side of the manifold for the AllFlow then when the pump starts to suck it will get a full compression on water and little on the SH side is that ok for the pump? or am i just lost.
-- Edited by Bee Clean Pressure Cleaning LLC on Tuesday 29th of March 2011 11:16:54 PM
__________________
Bee Clean Pressure Cleaning LLC Serving South Florida Residential and Commercial Chad 561-699-4685 Josh 561-699-4696 New Company Always Doing It Right!!!