The Roof Cleaning Institute Of America Training & Certification Forum
"Find A Certified Roof Cleaner Directory"

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Inspecting your roof? Don’t forget the flashing


Guest

Status: Offline
Posts: 1
Date:
Inspecting your roof? Don’t forget the flashing
Permalink  
 


It’s your roof’s job to protect your home from the elements. But one element in particular is more difficult to control and that’s water. Your roofing system can’t keep out water without flashing. While any homeowner knows what a roofing shingle is, many are unfamiliar with flashing and consequently, it is often overlooked. So when you’re inspecting your roof, don’t just look at the shingles and gutter system; pay attention to the flashing as well.

Types of flashing

Flashing is designed to keep water out of the most vulnerable parts of your roof. Most likely your roof will have flashing at roof valleys, chimneys, roof penetrations, skylights, rakes, eaves, ridges, and roof-to-wall intersections. Each of these areas is a weak spot in your roof and requires a different type of flashing to protect it from leaks. When inspecting your roof, pay special attention to these areas. Here are the different types of flashing:


    Step flashing can be found where a sloped roof meets a vertical wall. It’s the step flashing’s job to protect the joints between the roof and the wall

    Kick out flashing is found around the edge of the roof. Kick out flashing diverts water into the rain gutters as it flows off the edge of the roof. By diverting the water it protects the walls of your home

    Drip edges can be found along eaves and rakes of your roof. Drip edges keep water from seeping under the roofing

    Gutter apron flashing, as you can probably guess, protects the area by the rain gutter. It keeps water from running behind the gutters. Without the gutter apron flashing, water can erode the fascia

    Valley flashing protects the areas where two roof planes come together. It is shaped like a V or W to divert water away from that area

    Vent pipe flashing protects vents and pipes to keep water from getting in at those areas

Maintaining your roof’s flashing

Assuming the flashing was installed properly, it should continue to function effectively. However, over time flashing can come lose or begin to deteriorate. You should regularly inspect the flashing whenever you are inspecting your roof, ideally every six months. Because installing and repairing flashing is a very technical aspect of roof construction, it’s a job best left for professionals. If you see any corroded flashing or loose flashing, contact a roofing company immediately.

Home improvement news brought to you by bartonroof.com

Source:
thespectrum.com/article/20131122/LIFESTYLE/311220014/Roof-flashing-key-keeping-water-out



__________________


Guest

Status: Offline
Posts: 3
Date:
Permalink  
 

Good point. Make sure you inspect every element on the roof that has been added. TV antennas, whirlybirds, roof vents, chimneys and roof anchors all need to be inspected to ensure that they are not letting moisture enter the roof cavity.


__________________
Industrial Roof vents - Get one on your roof.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard