The Roof Cleaning Institute Of America Training & Certification Forum
"Find A Certified Roof Cleaner Directory"

RCIA Founder

Coating to protect against SH Corrosion.

Liberty SoftWash · Nov 7, 2013

I would say 50 to 100 a gl.

RCIA Founder

Roof Cleaning By A&E wrote:
I would say 50 to 100 a gl.

I know you are a Painting Contractor Eric, how can we figure coverage out for this roof cleaning chemical protective coating ?

Do u think it will stick to a metal flatbed ?

Liberty SoftWash · Nov 7, 2013

It says it on the can. I would buy 2 gl so you have enough. You would have to read the MSDS on the product. When painting it is always about the prep!

dabber · Premium Member Roof Cleaning Institute of America

Hey Chris I'm also a painting contractor , it looks like it would work fine , one thing you have to think about the liquid roofing waterproofing is a flexable coating when you use it on the bed of lets say a roof cleanning truck , and you throw or slide somthing heavy on it since it stays flexable you could scrape it off , I dont think its works the best when you have traffic on it , like a roof or wall , its perfect for , but there is garage floor material you can get in different sizes my trayler bed is 5X10 so I got a piece 5X10 and its made for heavy traffic and work perfect in traylers , flatbeds , etc hope it helps Dabber

Nov 8, 2013

Garage vinyl flooring is the way to go, same here.

www.samsclub.com/sams/g-floor-garage-floor-cover-protector-10-39-x-22-39/144557.ip

RCIA Founder

Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Garage vinyl flooring is the way to go, same here.

www.samsclub.com/sams/g-floor-garage-floor-cover-protector-10-39-x-22-39/144557.ip

Any problems with keeping this stuff down on a metal flatbed ?

Nov 8, 2013

Ask Dave Westerman. I've only used it on a wood floor.

RCIA Founder

Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Ask Dave Westerman. I've only used it on a wood floor.

I have bought and used wide sheet rubber, used glue and screws, and it still came apart and blew off the flatbed.

Thats why I was looking for a paint on coating.

I have not heard from Dave in Months, have you ?

Midatlanticpower · Premium Member Roof Cleaning Institute of America

If anyone ever uses LineX make sure they prep it well and not just put promoter on it. This is a pic of the rear latch on one of the vans that rusted through this morning. The whole van was LineX a few years back and started peeling within 2 months. They wouldnt warranty it because it was used for commercial. What a joke, they should have mentioned that before I spent $2600 to have it done.

ksroofs · Premium Member Roof Cleaning Institute of America

I have the vinyl flooring inside my trailer.. About to take it all out this weekend as I had a all-flow pump die on me and made a mess.. I actually have 5 gallons of palstic dip laying in the shop I bought, I am going to plastic-dip the enitre inside of the trailer to make it into a "bathtub" of sorts.. Ill post pics.

RCIA Founder

ksroofs wrote:
I have the vinyl flooring inside my trailer.. About to take it all out this weekend as I had a all-flow pump die on me and made a mess.. I actually have 5 gallons of palstic dip laying in the shop I bought, I am going to plastic-dip the enitre inside of the trailer to make it into a "bathtub" of sorts.. Ill post pics.

Please do post the pics Lee, I am curious to see what that will look like.

andy hinson · Nov 9, 2013

Apple Roof Cleaning Tampa FL (813) 655-8777 wrote:
Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Garage vinyl flooring is the way to go, same here.

www.samsclub.com/sams/g-floor-garage-floor-cover-protector-10-39-x-22-39/144557.ip
Any problems with keeping this stuff down on a metal flatbed ?

Very Good to see a post from one of. THE MASTERS of ROOF CLEANING!

Nov 9, 2013

Apple Roof Cleaning Tampa FL (813) 655-8777 wrote:
Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Ask Dave Westerman. I've only used it on a wood floor.
I have bought and used wide sheet rubber, used glue and screws, and it still came apart and blew off the flatbed.
Thats why I was looking for a paint on coating.

I have not heard from Dave in Months, have you ?

No, he used to be a great help to all us roof and exterior cleaners.

Nov 9, 2013

andy hinson wrote:
Apple Roof Cleaning Tampa FL (813) 655-8777 wrote:
Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Garage vinyl flooring is the way to go, same here.

www.samsclub.com/sams/g-floor-garage-floor-cover-protector-10-39-x-22-39/144557.ip
Any problems with keeping this stuff down on a metal flatbed ?
Very Good to see a post from one of. THE MASTERS of ROOF CLEANING!

Thank Andy, this year has been crazy nuts busy, and I'm just now have started to slow down.

RCIA Founder

andy hinson wrote:
Apple Roof Cleaning Tampa FL (813) 655-8777 wrote:
Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Garage vinyl flooring is the way to go, same here.

www.samsclub.com/sams/g-floor-garage-floor-cover-protector-10-39-x-22-39/144557.ip
Any problems with keeping this stuff down on a metal flatbed ?
Very Good to see a post from one of. THE MASTERS of ROOF CLEANING!

AMEN to that Andy!

Mike Sullivan is a true Master of the roof cleaning art.

Nov 9, 2013

Apple Roof Cleaning Tampa FL (813) 655-8777 wrote:
andy hinson wrote:
Apple Roof Cleaning Tampa FL (813) 655-8777 wrote:
Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Garage vinyl flooring is the way to go, same here.

www.samsclub.com/sams/g-floor-garage-floor-cover-protector-10-39-x-22-39/144557.ip
Any problems with keeping this stuff down on a metal flatbed ?
Very Good to see a post from one of. THE MASTERS of ROOF CLEANING!
AMEN to that Andy!
Mike Sullivan is a true Master of the roof cleaning art.

Thanks Chris! Only because I've learned from the best.

RCIA Founder

Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Apple Roof Cleaning Tampa FL (813) 655-8777 wrote:
andy hinson wrote:
Apple Roof Cleaning Tampa FL (813) 655-8777 wrote:
Roof Cleaning Pro Greensboro NC (336)362 7659 wrote:
Garage vinyl flooring is the way to go, same here.

www.samsclub.com/sams/g-floor-garage-floor-cover-protector-10-39-x-22-39/144557.ip
Any problems with keeping this stuff down on a metal flatbed ?
Very Good to see a post from one of. THE MASTERS of ROOF CLEANING!
AMEN to that Andy!
Mike Sullivan is a true Master of the roof cleaning art.

Thanks Chris! Only because I've learned from the best.

You have been greatly missed here Mike.

I "plead guilty" for not giving the RCIA the attention it deserves. My tampa roof cleaning business has literally exploded, and I had a lot of family/business/health related issues that kept me from giving the RCIA what it needed.

I want to call you soon Mike, and bring you up to speed at what has went on at the RCIA lately.

It is a LONG story .....

andy hinson · Nov 9, 2013

I never wanted to miss a post from Mike. There have been a couple of times I called him with questions and he was always helpful. Note goes here! those couple of calls were in a 5 year period. Mike gave answers based on experience and what he knows will and has worked for him.

RCIA Founder

andy hinson wrote:
I never wanted to miss a post from Mike. There have been a couple of times I called him with questions and he was always helpful. Note goes here! those couple of calls were in a 5 year period. Mike gave answers based on experience and what he knows will and has worked for him.

I hear ya Andy! Mike Sullivan was here in the very beginnings of the RCIA. I have always enjoyed his posts too.

The Roof Cleaning Institute Of America Training & Certification Forum "Find A Certified Roof Cleaner Directory"

The Roof Cleaning Institute Of America Training & Certification Forum
"Find A Certified Roof Cleaner Directory"