The Roof Cleaning Institute Of America Training & Certification Forum
"Find A Certified Roof Cleaner Directory"

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Applying product near cedar siding


Guest

Status: Offline
Posts: 83
Date:
Applying product near cedar siding
Permalink  
 


I'm not worried about hitting vinyl siding while cleaning a roof, but what do you do with a dormer or a roof to wall section that has cedar siding.  I know that the ground guy needs to keep stuff wet, but will he be rinsing away the sauce before it becomes effective?

__________________
Jeff Granowski
All Craftsmen Exteriors
952-898-4680


guest

Status: Offline
Posts: 2289
Date:
Permalink  
 

roofcleaningminneapolismn wrote:

I'm not worried about hitting vinyl siding while cleaning a roof, but what do you do with a dormer or a roof to wall section that has cedar siding.  I know that the ground guy needs to keep stuff wet, but will he be rinsing away the sauce before it becomes effective?



I personally would try to talk the H/O into cleaning them as well

or you can wet them down, but that will still effect them some what.

Or the other option would be just don't get any cleaner on them? at least minimize it.

I always tell the H/O it's really hard to take a shower with out getting your feet wet.

 



-- Edited by Walk on Friday 2nd of April 2010 10:21:12 PM

__________________
H20 POWERWASHING
Roof Cleaning Lanoka Harbor NJ 08734
clydesampsel@gmail.com
www.roofcleaningjerseyshore.com



Guest

Status: Offline
Posts: 778
Date:
Permalink  
 

You could have your ground guy hold a peice of card board up to sheild the cedar siding. Just have him move it along as you spray

__________________

 

 

 

 

 

 

 

 

 



Guest

Status: Offline
Posts: 1617
Date:
Permalink  
 

For cedar trim and shakes I will typically wet down with water, and then spray the adjacent roof area with a backpack or pump up sprayer with super hot (but controlled) mix about two foot away from delicate cedar/redwood/natural trim.  

Let me try again, this isn't sounding right.  Wet the wood. Spray the shingles by the wood with a pump up using the sauce, but make the sauce a little hotter for that area. You've got much better control coming out of the pump up than out of a roof pump.  However you won't have the same volume, hence the "hottening" of the sauce.

I have ruined some stained wood in my younger days, and it sucked!


__________________
Ray Burke
Spray Wash Exterior Cleaning
850.528.3226
visit our website
Soft Washing and Pressure Washing
Licensed & Insured
Serving Tallahassee, FL, The Big Bend
and SW Georgia
http://www.spray-wash.com
 


Guest

Status: Offline
Posts: 83
Date:
Permalink  
 

Thanks for the knowledge and advice. If it's not steep, I'm comfortable walking most roofs so a little extra prep time is well worth saving the cost of replacing cedar or painting.

__________________
Jeff Granowski
All Craftsmen Exteriors
952-898-4680


Premium Member Roof Cleaning Institute Of America Certified Roof Cleaning Specialist

Status: Offline
Posts: 3547
Date:
Permalink  
 

I did a roof with cedar shake siding last year. We used a pump up. So much more control I'm assuming, (we still use pump ups) than with a delavan we have now. I was very worried. It Came out fine! Now shooting 5- 8 gpm??? Go with the pump up suggestion!

__________________

240-355-1110

From up on the Roof cleaning, Gutter cleaning, to down on the Concrete cleaning...

All pressure washing services in between!

Serving  PG, Charles, St Marys and Calvert county Maryland

Cleaning service 


Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard