The Roof Cleaning Institute Of America Training & Certification Forum
"Find A Certified Roof Cleaner Directory"

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Need some help


Guest

Status: Offline
Posts: 60
Date:
Need some help
Permalink  
 


Hello all,

I just got my rig set up last week.  Thank you all for the information and wisdom that you've shared.  I've learned a truck load of knowledge from RCIA members in the last few months, but I've got plenty more to learn.

 

Here are the specs on the rig.

150 gal. tank

5x10 open trailer

Delavan Fatboy

200' Kuri Tec hose

Titan 28" hose reel

Deep cycle battery

I had a local sprayer shop help me set it up and everything was working fine when I shot water through the system.  I mixed up a batch of Cider Sauce to practice on a buddies roof last night and I kept loosing pressure while I was spraying.  The sprayer shop recommended to I put a pressure gauge on the pump to adjust the pressure if needed and to avoid dead heading the pump.  I was wondering if I should take the gauge out and just plumb from the tank to pump to hose???  

 

Another culprit might be where the hose connects to the hose reel.  There is an elbow to connect the hose to, but whenI reel the hose up it puts a kink in the hose right there at the elbow.  One way to avoid that would be to unravel the hose all the way out each time I use it, but I thought there might be a better way.

On a brighter note, the roof turned out pretty good.   I'll post more pics on the rig and roof later.  It takes forever for me to download pictures with my internet speed.

 

Any advise is very very much appreciated.



Attachments
__________________
Dustin Miller
Roof Cleaning of Iowa
Indianola, IA 50125
(515) 689-7663



Guest

Status: Offline
Posts: 44
Date:
Permalink  
 

Dustin

Your hose needs  to be keep down inside your hosereel where you hook your hose up to the reel. I found it best, if you roll your hose up from the far side of the reel, your hose wont Kink.

Check all your clamps to make sure your not sucking air and loosing preasure.



__________________

  Ronnie g graeff



Guest

Status: Offline
Posts: 124
Date:
Permalink  
 

You may try putting a nipple with another elbow where the kink is now. Then when you wind up the hose let it have a little slack in the first wind so it doesn't kink again. don't forget to cut off the existing kink that you have now.

__________________

Dan Shay (304) 233-6288
Ohio Valley Roof Cleaning
Roof Cleaning Wheeling WV 26003
 Weirton West Virginia Roof Cleaning
  StClairsville Ohio Cleaning Roof
 Steubinville Ohio Roof Cleaning



Guest

Status: Offline
Posts: 386
Date:
Permalink  
 

An elbow fitting or something will help you but also you should always pull all your hose off the reel before you spray and if you do have a slight kink it will not be that way once you have it all pulled out off the hose reel. If you try keeping some on the hose reel it will cause a pulsing effect on your pump. Another thing mix your tsp and SH the day before unless you just run out on the job. I know if I do not use heated water to mix my tsp on the job it will cause a slight bit of clogging on the pump but I also have a heated industrial pressure washer so that makes it easy to do if I run out. 

Nice job though on your fatboy.


__________________

ROOF CLEANING SPECIALIST
2129 General Booth Blvd, Ste 103-216
Virginia Beach, VA 23454
Serving all of Hampton Roads, VA
(757) 650-7456
 



Guest

Status: Offline
Posts: 195
Date:
Permalink  
 

Was the pump cycling? It could also be the nozzle size. If it's too small it will be creating too much back pressure which would cause the pump to cycle.

__________________

Prime Choice Power Wash LLC
Roof Cleaning Kissimmee Florida

Kissimmee Roof Cleaning Blog
Merchant Circle
Nick Wood
407-452-4526
info@cleankissimmee.com




Guest

Status: Offline
Posts: 454
Date:
Permalink  
 

confuseWhats all the hoses for at the pump its a demand pump one in and one out ?

__________________
Roof Cleaning Long Island New York (631) 220 6985


Guest

Status: Offline
Posts: 606
Date:
Permalink  
 

Vinny is right. It looks like you overcomplicated the hose set up. That regulator may be restricting flow. It looks like you have a bypass type of set up going on. Maybe the extra plumbing is causing some cavitation in the pump and dropping the pressure.

Brian

__________________

Brian Friel
The Roof Cleaners llc
Oxford PA 19363
610 842 2104

 

 

 



Guest

Status: Offline
Posts: 454
Date:
Permalink  
 

 Brian,thats what it looks like, they set it up with a bypass and that hose on the reel looks like its just connected to a nipple should be on a barbed style connector, and is that nipple galvanized steel, rust city, use brass

-- Edited by Roof Cleaning Long Island New York (631) 220 6985 on Wednesday 19th of August 2009 11:09:31 PM

__________________
Roof Cleaning Long Island New York (631) 220 6985


Roof Cleaning Institute Of America Certified Roof Cleaner

Status: Offline
Posts: 590
Date:
Permalink  
 

Will repost if closed.



-- Edited by GreatWhiteTechnologies on Saturday 19th of September 2009 05:28:26 PM

__________________


Guest

Status: Offline
Posts: 60
Date:
Permalink  
 

Bill,

I think you and Vinny are right on the pressure valve.  It was their recommendation to put it on and I trusted what they said sense setting up sprayer systems is what they do.  In their defense though they primary set up ag systems for farmers and had never set up a system to spray our chemicals.  

The elbow that is on the reel came to me that way from Titan or Pressure Washer Services, whomever put the hose on.  I'll roll the entire hose out on my next roof and see if between the hose, replumbing the pump and a bigger nozzles if this solves the problem.  

Thanks a million for the input.  


__________________
Dustin Miller
Roof Cleaning of Iowa
Indianola, IA 50125
(515) 689-7663



Guest

Status: Offline
Posts: 60
Date:
Permalink  
 

Prime Choice Power Wash wrote:

Was the pump cycling? It could also be the nozzle size. If it's too small it will be creating too much back pressure which would cause the pump to cycle.




       The pump was running the entire time.  When I was shooting water it would stop running once I let off the trigger on the gun.  



__________________
Dustin Miller
Roof Cleaning of Iowa
Indianola, IA 50125
(515) 689-7663



Guest

Status: Offline
Posts: 106
Date:
Permalink  
 

I LOVE THESE FATBOYS....when ever i see one set up i drool...

got a quote on one yesterday...have decided to go with it...

the guy selling it to me wasnt wrong when he said this pump gives results not far off some petrol powered units

__________________

Caleb Brown
Owner

WASH N WOW Non-Pressure Roof Cleaning
"We do the WASH, you do the WOW"

Servicing Gold Coast and Brisbane, QLD, Australia

www.goldcoastroofcleaning.com


Guest

Status: Offline
Posts: 454
Date:
Permalink  
 

Dustin Miller wrote:

Bill,

I think you and Vinny are right on the pressure valve.  It was their recommendation to put it on and I trusted what they said sense setting up sprayer systems is what they do.  In their defense though they primary set up ag systems for farmers and had never set up a system to spray our chemicals.  

The elbow that is on the reel came to me that way from Titan or Pressure Washer Services, whomever put the hose on.  I'll roll the entire hose out on my next roof and see if between the hose, replumbing the pump and a bigger nozzles if this solves the problem.  

Thanks a million for the input.  


Dustin i have the same hose reel remove that nipple they put on the elbow and put a brass 1/2 npt x 5/8 or 3/4(what ever size hose your using) hose barb connector . this shorter connector should help with the kinking ,if you have that soft hose by kuritec that also is helping it to kink, i have the kuritec but its not as glossy as yours, i only unreel what hose i need for the job and never have a pressure issue and yes the pump will always run when the gun is on and shut off a second or two after you turn it off

 



__________________
Roof Cleaning Long Island New York (631) 220 6985


Guest

Status: Offline
Posts: 60
Date:
Permalink  
 

Vinny,

Thanks for the info.  On Thursday I did just what you described and everything is working great.  I did my second roof today and had no pressure problems.  Here are some before and after pics.  This is with no rinsing or rain yet.  Customer was very happy and so was I.

Thanks again for all the help guys.




Attachments
__________________
Dustin Miller
Roof Cleaning of Iowa
Indianola, IA 50125
(515) 689-7663



Guest

Status: Offline
Posts: 454
Date:
Permalink  
 

confuse Wow thats great if you didn't use a sprinkler on the deck try it next time its a god sent keep up the great worksmile

-- Edited by Roof Cleaning Long Island New York (631) 220 6985 on Saturday 22nd of August 2009 09:12:29 PM

__________________
Roof Cleaning Long Island New York (631) 220 6985


Guest

Status: Offline
Posts: 44
Date:
Permalink  
 

Dustin
Your roof looks good, great job!



__________________

  Ronnie g graeff



Guest

Status: Offline
Posts: 60
Date:
Permalink  
 

I did use one and your right, that's a nice piece of mind.   

__________________
Dustin Miller
Roof Cleaning of Iowa
Indianola, IA 50125
(515) 689-7663



Guest

Status: Offline
Posts: 60
Date:
Permalink  
 

harleyp wrote:

 

Dustin
Your roof looks good, great job!

 




Thanks guys, I couldn't have done it without the RCIA.



__________________
Dustin Miller
Roof Cleaning of Iowa
Indianola, IA 50125
(515) 689-7663



Roof Cleaning Institute Of America Certified Roof Cleaner

Status: Offline
Posts: 590
Date:
Permalink  
 

Looks great Dustin. Cleaning Iowa roofs one at a time.

__________________


Guest

Status: Offline
Posts: 1172
Date:
Permalink  
 

yeah baby , way  to  go  that roof looks great, it was a good one to do for your second job by the looks of it, I bet you were happier than a sissy with a bag full of -----, well anyways I know u were  keep on cleaning my  friend, the roof cleaning GODS are awsome......

KID

__________________

Elite Roof Cleaners
Roof Cleaning Missouri & Kansas City

 65808-64108

417-230-8103 * 913-839-6577
RoofcleaningMissouri

RoofcleaningKansas

1 2  >  Last»  | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard